Factoryclix logo

Engineering hub

Engineering Hub: System Design, Drawings & BOQ

Enter the duty, or describe any requirement and attach the drawing. AutoCAD, PDF, a spreadsheet or a photograph is accepted. The desk sizes what it can from NBC 2016 Part 4, IS 15105, IS 3844, IS 13039, TAC, NFPA 13, NFPA 20, IS 732, IS 3043, IS 2189, ISHRAE and ASHRAE 62.1, draws the P&ID or single-line diagram, the scaled plan, both elevations, section A-A and the isometric, and writes the bill. A PEB shed takes length, width, eave, bay, slope, basic wind speed, crane and cladding, and draws the framing plan, the anchor bolt plan, both elevations, section A-A and a rotatable 3D model. Fire suppression and fire detection sit under Fire protection, not as a separate project type. A mark you add on the sheet is saved with the download. A licensed engineer still stamps the issue.

Choose project type

Fittings and steel is selected. The subcategories for this type are under this list. The drawing and the bill further down are the existing type page. A catalogue price is used when it matches. Otherwise a published Indian rate plus 20% is shown with its source. Erection is 10% of that system's materials, testing 2%, and transport 3%.

Subcategories

Each subcategory has its own design basis, calculation, drawings, bill and quotation.

Fittings and steel

Flanges, elbows, tees, unions and the structural steel that carries the pipe rack.

AutoCAD DWG or DXF, PDF, or any other file.

Factoryclix

Rev A

SHEET 1 OF 7

B1 ISMB primary 8 lengthC1 ISMC columns 1,574.4 kgBR ISA braces 16 lengthFactoryclix / Proactive Industrial Pvt LtdFittings and steelDRAWINGSteel line diagramSHEET 1 OF 7SCALE NTSREV AEnquiry2,000 m² per floor · 2 floors · eave 8 mEnquiry drawing. A licensed engineer must verify and stamp before use.Design basis Pipe rack 8 ISMB 300 · 8 ISMC 150 (1,574.4 kg) · 16 ISA
  • 2,000 m² is the area of one floor, 2 floors, 8 m height. Sprinkler heads, sprinkler branch pipe and smoke detectors are that floor counted again on every floor. The sprinkler pump stays on the remote design area.
  • Prices on the quotation are ex-GST. A catalogue match is used first. Where the catalogue has no price, a published Indian rate plus 20% is used and the source is on the line. GST at 18% is added on every material line. A price the source already quoted including GST is converted to the ex-GST rate and 18% is shown separately. Erection and installation labour is 10% of that system's material subtotal, testing and commissioning 2%, and transport 3%. GST 18% is added on those allowances.
  • Standards cited on this desk: NBC 2016 Part 4, IS 15105, IS 3844, IS 13039, TAC, NFPA 13, NFPA 20, IS 732, IS 3043, IS 2189, ISHRAE and ASHRAE 62.1.

Calculation

PartFormulaWorkingResultStandard
Pipe rackPrimary beams from the floor area, one per 250 m² and at least four2,000 m² of one floor. Columns and braces follow the beams. Not a fire-water duty.8 ISMB 300 · 8 ISMC 150 (1,574.4 kg) · 16 ISAIS 800 / IS 808

Design basis

PartSpecificationStandard
ISMB 300Pipe-rack primary beams. MOQ is 1 MT.IS 800 / IS 808
ISMC 150Calc 8 lengths of 12 m | Billed 1,574.4 kg at 16.4 kg/m. The catalogue rate is per kg, not per length.IS 808
ISA 75x75x6Bracing angles. MOQ is 1 MT.IS 808
chequered plate 6Walkway plate on the rack.IS 3502
BoltSplice and cleat bolts, eight on each of 8 primary beams. Calc 64 bolts | Billed 1 lot of 100. M16 × 60 mm, grade 8.8. The catalogue price is a box or lot, so it is not multiplied by the bolt count.ISO 4014
PrimerPipe-rack steel, an allowance of 1.5 m² an ISMB and 1.2 m² an ISMC, 8 beams. About 22 m². Two coats, an allowance of 10 m² per litre per coat.IS 1477
Finish paintPipe-rack steel, an allowance of 1.5 m² an ISMB and 1.2 m² an ISMC, 8 beams. One finish coat on the same area. Asian Paints Apcolite gloss, the published 1 L rate.IS 1477
Welding rod32 site joints, 0.5 kg a joint.AWS A5.1
TestingFittings and steel testing and commissioning. 2% of this system's material subtotal, ex-GST. GST 18% is added on this allowance.Site practice
ErectionFittings and steel erection and installation labour. 10% of this system's material subtotal, ex-GST. GST 18% is added on this allowance.Site practice
TransportFittings and steel transport and freight. 3% of this system's material subtotal, ex-GST. GST 18% is added on this allowance.Site practice

Get this designed & installed by us

Statutory

  • This is an enquiry BOQ, not a sanctioned design. A licensed consultant stamps the drawing before construction.
  • The pipe rack is a structure. A structural engineer designs it to IS 800 and IS 875 and stamps the GA before fabrication.

Fittings and steel BOQ

Proactive Industrial Private LimitedGSTIN: 24AAQCP1475R1ZLRegistered office: C-119, Siddhivinayak Business Tower, Makarba, Sarkhej, Ahmedabad, Gujarat 380051Branch offices: Vadodara | Padal (Kheda) | Bharuch

Supply

  • ISMB 300

    Pipe-rack primary beams. MOQ is 1 MT. · IS 800 / IS 808

    8 length × —

    GST —

    Amount —

  • ISMC 150

    Calc 8 lengths of 12 m | Billed 1,574.4 kg at 16.4 kg/m. The catalogue rate is per kg, not per length. · IS 808

    1574.4 kg × —

    GST —

    Amount —

  • ISA 75x75x6

    Bracing angles. MOQ is 1 MT. · IS 808

    16 length × —

    GST —

    Amount —

  • chequered plate 6

    Walkway plate on the rack. · IS 3502

    3 no. × —

    GST —

    Amount —

  • hex bolt M16 60 mm grade 8.8

    Splice and cleat bolts, eight on each of 8 primary beams. Calc 64 bolts | Billed 1 lot of 100. M16 × 60 mm, grade 8.8. The catalogue price is a box or lot, so it is not multiplied by the bolt count. · ISO 4014

    1 lot × —

    GST —

    Amount —

  • red oxide metal primer 1 L

    Pipe-rack steel, an allowance of 1.5 m² an ISMB and 1.2 m² an ISMC, 8 beams. About 22 m². Two coats, an allowance of 10 m² per litre per coat. · IS 1477

    5 L × —

    GST —

    Amount —

  • synthetic enamel finish 1 L

    Pipe-rack steel, an allowance of 1.5 m² an ISMB and 1.2 m² an ISMC, 8 beams. One finish coat on the same area. Asian Paints Apcolite gloss, the published 1 L rate. · IS 1477

    3 L × —

    GST —

    Amount —

  • welding electrode E6013 3.15 mm

    32 site joints, 0.5 kg a joint. · AWS A5.1

    16 kg × —

    GST —

    Amount —

  • transport to site

    Fittings and steel transport and freight. 3% of this system's material subtotal, ex-GST. GST 18% is added on this allowance. · Site practice

    1 lot × —

    GST —

    Amount —

Supply subtotal—

Installation

  • testing and commissioning

    Fittings and steel testing and commissioning. 2% of this system's material subtotal, ex-GST. GST 18% is added on this allowance. · Site practice

    1 lot × —

    GST —

    Amount —

  • erection and labour

    Fittings and steel erection and installation labour. 10% of this system's material subtotal, ex-GST. GST 18% is added on this allowance. · Site practice

    1 lot × —

    GST —

    Amount —

Installation subtotal—

GST —

Grand total —

Supply is the material and the transport. Installation is erection, testing and commissioning, and the other site services. Each section has its own ex-GST subtotal. GST and the grand total follow. A catalogue match is used when the catalogue has a price. Where it does not, the rate is a published Indian marketplace or maker price plus 20%, and the source is on the line. Every material rate is ex-GST, and GST at 18% is added on it. A published price that already included GST is converted to the ex-GST figure and 18% is shown separately. Erection and installation labour is 10% of that system's material subtotal, testing and commissioning 2%, and transport 3%, with GST at 18% on those allowances.

Freight

Ahmedabad to Vadodara · about 131 km · chargeable 150 kg

Freight ₹1,800 ex-GST · GST ₹324 · Payable ₹2,124

Road part-load from the pincode. Chargeable weight is the higher of actual kg and 300 kg per cubic metre. Confirm the truck before a PO.